How to add password to your Trendnet router?

Trendnet Router

To manage network security, we have to make some changes in the router’s settings. As we all know the administrative password is set as default in Trendnet router. But we can easily modify this password by using Web Administration Panel. If you using a Trendnet router then read this blog carefully to add a password to Trendnet router.

Steps to add password to Trendnet router :

1. Open your internet browser tab and type Trendnet router’s IP address “196.168.0.1” in the address bar. Press Enter and login into Trendnet router setup wizard.

2. Now type the router’s username and password in the required fields and click on Login option.

3. Go to left side of the screen and click on the “Wireless” option. Now navigate to the Wireless sub menu and click on Security.

4. Choose WPA2 as the authentication type and type a new password for Trendnet router in the Key 1 field.

5. After this step, click on Apply button and save the changes.

How to Reset Administrative Password :

How to Send Multiple emails at Once Without Showing your Mail ID?

You can also modify Administrative password in an easy way. Open your web browser and navigate to “196.168.0.1” address. After pressing Enter button, you are prompted into Trendnet router login wizard. Just type current administrative username and password in the appropriate field boxes. After logging, click on Password option that is present on the left side of the screen. Now type a new password in the “New Password” field box. Again type a new password in the “Verify Password” field. Now save the entire settings by clicking on “Save” button.

Installation Process of Trendnet Router

Take an ethernet cable and plug one end into LAN jack of Trendnet router and another end to your computer. Now connect a wireless router to the electrical outlet and press the “Power On” button. After connecting to the power supply, make sure LAN, WAN, WLAN lights are blinking. Now open Mozilla Firefox and type “192.168.10.1” in the address bar. After this, press Enter button and type “admin” in the username field box. Next, click OK and login into the router. Click on Network and choose WAN settings from the drop down menu. Choose DHCP and click on Apply button. Now navigate to the Wireless option and select “Basic” option. Type a new network name in the column of SSID and click on Apply button. Go to Wireless menu and set the security mode as “WPA2-PSK”. Type a new passphrase in the Pre-Shared key field and finish the process by clicking on Apply button.

If issues still continue then you can ask for support...

Posted by : Unknown

6 Comments

Saturday

6 comments